How To Cut Your Craft In Quilting
When you start your quilt, you will need patterns, such as rectangles, squares, cut strips, and so on. Once you gather your patterns, you will need cutting tips to complete your quilt.
Cutting the strips:
When you begin to cut your strips, you will need to align your fabric, mark, etc. Use a ruler to decide the width and start cutting once you reach your desired dimensions. For instance, if you want to create a 2-inch strip, locate the mark on your ruler and place the area side by side of your edges that square.
Once you finish cut the strips. You will need a rotary cutter to complete your mission. Your layers figures are based on the strips you cut. You can also mark and then cut your strips so that you have separate squares. You perform the same actions when making rectangles. Squares are also cut in the same fashion. However, you will need to create two squares per cut.
You will need two rectangles also per cut, since the fabric is thick. For instance, if you were to cut 3 ½ inches of fabric strips x 44 inches, you will need to cut 6 ½ inches x 3 ½ x 6 ½ inches to form your rectangles.
When you start to cut your triangles, start at a 45-degree angle. Cut the squares succeeding to cut the squares slantwise, or diagonally and in half. When cutting your triangles, keep in mind that the longer sides require seams that allow room to finish. You need about a 2-inch finish line per triangle, or side. On three sides however of your triangle, you will need to leave a width of 2 ½ inches to complete your task.
If you are not use to measuring materials, purchase a transparent, heavy-duty ruler and create templates to use as your guide.
Use your templates, aligning it on the material, and lay it in line down the edges at the three sides and use your ruler in a straight line and over your template. Once you have your template in position, you can start cutting across the width to meet your template.
Once you have cut your patterns, you will need to organize and then cut your pieces. Once you cut, your pieces try to organize them so that they do not get lost. You can categorize the pieces and stack them neatly in a desired area near your sewing station.
After you organize your pieces, you want to learn how to press properly. You will need to iron your fabric to prepare it, yet you want to learn pressing techniques, rather than strict ironing. You merely press and lift, relocate, press, release, and relocate, repeating the same cycle to press your fabric.
You will need to press your fabric as you move through the stitching stage also. You will also need to press the allowances at the seams. Head in the same direction at what time you are pressing the seams. To make your fabric durable and sturdier, press the seams to one of your sides.
Learn more about pressing, and irons to complete your quilt. Pressing is important. Once you have your patterns together, pressing down, etc, you can move onto piercing a perfect quilt.
Of course, if you are not in the mood for hand piercing, you can pick up a few tips in stitching seams and allowances, as well as appliqué. Appliqué is the process of fabric pieces sewn onto fabric, sewing shaped parts of fabric onto an underpinning to form a pattern or design.
