Forklift

Sometimes called a forklift truck, the forklift is a powerful industrial truck that is used to lift and transport material by steel
forks that are inserted under the load. Forklifts are commonly used to move loads and equipment that is stored on pallets. The
forklift was developed in 1920, and has since become a valuable piece of equipment in many manufacturing and warehousing operations.

Types The most common type of design with forklifts is the counter balance. Other types of designs include the reach truck and side
loader, both of which are used in environments where the space is at a minimum.

Control and capability Forklifts are available in many types and different load capacities. In the average warehouse setting, most
forklifts have load capacities of around five tons.

Along with the control to raise and lower the forks, you can also tilt the mast to compensate for the tendency of the load to angle
the blades towards the ground and risk slipping it off the forks. The tilt will also provide a limited ability to operate on ground
that isn't level.

There are some variations that allow you to move the forks and backrest laterally, which allows easier placement of a load. In
addition to this, there are some machines that offer hydraulic control to move the forks together or further apart, which removes the
need for you to get out of the cab to manually adjust for a different size load.

Another forklift variation that is sometimes used in manufacturing facilities, will utilize forklifts with a clamp attachment that you
can open and close around a load, instead of having to use forks. Products such as boxes, cartons, etc., can be moved with the clamp
attachment.

Safety Forklifts are rated for loads at a specified maximum weight and a specified forward type center of gravity. All of this
information is located on a nameplate that is provided by the manufacturer and the loads cannot exceed these specifications.

One of the most important aspects of operating a forklift is the rear wheel steering. Even though this helps to increase
maneuverability in tight cornering situations, it differs from the traditional experience of a driver with other wheeled vehicles as
there is no caster action.

Another critical aspect of the forklift is the instability. Both the forklift and the load must be considered a unit, with a varying
center of gravity with every movement of the load. You must never negotiate a turn with a forklift at full speed with a raised load,
as this can easily tip the forklift over.

Normally, to drive a forklift, you'll need to pass a basic test. They aren't difficult to operate, although you'll need to be safe
when you operate them. Once you have operated one for a while, you'll have no problems being safe.